It all happened very suddenly, just in the last couple of days. Both VICTORY and APS factories got raided, and the whole scene’s mood just dropped to freezing point. When the news first spread, a lot of people didn’t believe it.
After all, VICTORY factory only just appeared at the end of 2025, holding onto the supply chain left behind after CLEAN factory shut down, and they were riding a strong wave. APS factory doesn’t even need much introduction — the reputation they’ve built over the years making Audemars Piguet and IWC pieces, players know exactly what’s up.
Replica Watches Trusted Dealer Some have paused supply of watches from these two factories, and some have cleared all related product info from their websites. Some say the factories themselves got raided, others say it was only the middleman between the factory and dealers who got arrested. Of course, there’s still no confirmed info right now, hope everyone doesn’t panic too much.
In the end, there’s really only two possibilities: either they pull through like APS did after their previous raid, or they disappear completely like CLEAN. Instead of stressing for nothing, might as well use this moment to break down why these two factories managed to sit at the very top.
Top Replica Watch factory background overview
VICTORY factory only entered the market at the end of 2025. After CLEAN factory exited the market for reasons everyone knows, VICTORY factory took over its supply chain. Case sets, accessories, assembly systems — the resources that are hardest for a new factory to build, it got them straight away.
This means its starting point was already where others land after years of hard work, and this “successor” identity made the market place extremely high hopes on it. And it didn’t disappoint, within just a few months it had rolled out product lines covering Rolex, Patek Philippe and multiple other brands.
APS factory took the completely opposite path. It showed up like a dark horse, aggressively crashing into the Audemars Piguet market that was previously dominated by names like JF. It’s best at making Audemars Piguet, IWC, Jaeger-LeCoultre and Richard Mille, relying on ultra-high visual accuracy and top-level integrated movements, giving more people the chance to own High-quality replica watches.
VICTORY factory Replica Watch movements
VICTORY factory managed to stand firm in just a few months purely because of a complete and high-level movement configuration setup.
The Daytona uses the Dandong 4130, which solved the long-standing problem of chronograph models being too thick. Once cased up, the whole watch has balanced proportions, no longer giving off that bloated feeling. Power reserve goes over 70 hours, and the chronograph pusher feedback is crisp and clean, not that loose sloppy feel.
For GMT models, they use the Dandong 3285, which sorted out the persistent headache of the GMT jump date issue, date switching is smooth, no more getting stuck at midnight. The basic three-hand models use the Dandong 3235 and 324, main focus being stable and durable, good for people who want hassle-free daily wear.
Integrated movements and Free sprung movements Replica Watch
Before APS factory came along, most Audemars Piguet replica versions were basically 9015 movement with a decorative plate solution. The appearance could be roughly imitated, but the balance wheel position was wrong. The genuine Cal.3120 has the balance wheel at the 7 o’clock position, while the 9015 balance wheel sits at the 12 o’clock position. Anyone with a bit of knowledge could flip it over and see through it instantly through the display caseback — this was a structural flaw that simply couldn’t be fixed.
APS factory’s custom Cal.3120 integrated movement completely threw out that old approach. It’s not a decoration plate, it’s a newly designed integrated structure, with the balance wheel accurately placed at the 7 o’clock position. All the gears and jewel bearings you can see have actual transmission function. When winding, the entire gear train really moves, not just dead decoration.
And in the APS factory Audemars Piguet Royal Oak 15500 Top-tier replica watches, the 4302 movement it carries is a Free sprung design. It removes the regulator pin, adjusting timekeeping precision by changing the rotational inertia of the balance wheel itself. This structure has stronger shock resistance and better long-term stability.
Replica Watch QC
Although VICTORY factory hasn’t been around long, the watches leaving the factory are checked on basics like timekeeping accuracy, hand alignment, date window centering, with daily performance generally kept within an acceptable range, no crazy deviations. The assembly-line background foundation means it doesn’t have any obvious weaknesses here.
APS factory’s quality control consistency is even more on point, even across different batches they can keep a fairly uniform standard. For experienced players, being able to pick up a watch without having to inspect it three times over just to feel at ease, that kind of trust itself is something rare.
Is APS factory Replica Watch worth buying?
Their replica versions are indeed all very worth buying. Some might think that if APS factory goes down, the biggest loss would be not being able to buy its Audemars Piguet pieces. That would be wrong. Its AP is indeed very well made, but honestly, if you really had to find a substitute it’s not completely impossible. What really makes people feel it’s a pity are APS factory’s IWC and Richard Mille pieces.
Before APS factory took over, the quality of IWC Pilot and Portuguese Replica Watch was always pretty mediocre. Can’t say they were bad but definitely can’t call them good. APS factory finally got the IWC replica craftsmanship down to a fine art, and the momentum was strong.
On the other side, APS factory’s next heavyweight product — a true 1:1 Richard Mille RM35 Rafael Nadal edition — was already all set and ready to launch, and then it just came to a sudden stop. This kind of regret, getting cut off while still on the way up, stings even more than if it had never existed in the first place.
Where to Buy the Best RM35-02 Replica Watch After the Raid
If APS is confirmed not to come back, then it really is a solid piece of bad news. The carbon fiber case it used on this product is the best performing one among all non-custom factory solutions. The texture pattern and overall case finishing are really hard to find an equal substitute for. This level of carbon fiber craft is already scarce in the Chinese Replica Watch market, once APS exits, there may well be a vacuum period in the short term.
So can you still get a good Richard Mille RM35-02 clone version? The whole situation isn’t completely hopeless. The RMAL1 movement inside the RM35-02 is actually manufactured by Dandong movement factory. Also, the UMI factory Richard Mille RM35-02 uses the exact same Dandong RMAL1. At the very least this tells us the core part, the movement, wasn’t affected by this event, supply still exists.
Replica Watch buying approach
At this point in time, whether you’re someone who already owns pieces or someone still watching from the sidelines, you’re facing some real choices. If you’ve been eyeing the VICTORY factory Rolex Daytona or Pepsi & Bruce, dealer channels might still have a small amount of stock right now. Making a move while Replica watch prices haven’t fluctuated wildly from the news spreading is a relatively safe strategy.
As for APS factory IWC and Richard Mille RM35-02, you’ll need more patience. The gap left behind is hard to fill in the short term. The situation for the RM35-02 is relatively less grim, you can see if someone later steps in to fill the case supply gap. If they really end up following CLEAN’s path, chances are market prices will rise, and inventory will gradually shrink, so cherish what’s available while you can.
Deep dive into Chinese Replica Watch supply chain: how the market evolves after a top factory falls
Looking back, VICTORY went from taking over CLEAN’s supply chain to being recognized by the market in just a few months. It proved that effectively integrating good resources can rapidly create a top-tier factory. APS factory spent years proving that obsessions over integrated movements, Free sprung finishing, and ultimate case sets can eventually turn into real technical moats.
One represents efficiency, the other represents depth. Both meeting trouble almost at the same time indeed makes the market suddenly lose two important coordinates. But then again, this industry has been through countless similar shocks in the past. Every time it feels like the sky is falling, and in the end life always finds a way and produces even more 1:1 Best Replica Watch choices. This time should be no different.
The roots of the supply chain aren’t in any single factory, they’re in the upstream movement factories, case factories, and parts workshops. As long as these sources are still running, the seeds of good products won’t die out. So yeah, feel sorry about it, but absolutely no need to think it’s the end of the world. What needs to come will always have newcomers filling the gap. Who knows, maybe the next one to pick up the baton is already on the way.
